single TZT3 to 175HW and 175M transduecers

[noexcuses]

I am planning on a single TZT3 12" and want to run a 175HW with a 175M 1KW transducers. Is this possible with a single unit?

Looking at the manual It looks like that a High and Low transducers or Low and medium can be hooked up together but not Medium and High.

Any way to make this happen without buying another TZT3?

 

[Johnny Electron]

The pairs used must be on of the approved pairs which are programmed in the software.
https://www.furunousa.com/-/media/sites ... ducers.pdf
When TZT3 first came out it didn't allow any pairing and then the Y cable and software was offered by upgrading to what we have today. This will continue to advance and they say more pairs will be added in v3 software now slated for March 2022 (This coming Spring). Hopefully the ones they add to the software will be what you are looking for. No, you can't run pairs on the same machine until the software can support it, unfortunately. I know of no workaround other than the one you mentioned about running one at one MFD and the other on a second.

 

[noexcuses]

Thanks Johnny, not what I wanted to hear but what I was thinking lol.