Airmar 299 with FCV-295

[Anonymous]

Hi again
Can you also advise correct tap connections for the R299 using 38 and 200KHz and the appropriate settings in the Furuno Menu
Thanks
Eric Leigh

 

[Snips]

Eric,
Use Tap C for 38Khz and Tap A for 200Khz.

Snips

 

[Anonymous]

Thanks for that Snips, that is what I thought
Also, if you could take a look at the other question I posted right below this one about NMEA wiring to the Furuno
REgards
Eric