What's the model number?

A

Anonymous

Guest
Just purchased a used Furuno NavNet C-Map NT. Plate in back says RDP-131 Serial Number 4306-5567

I want to download the Operators Manual, but I need to know the exact model number to do so.

What do I have? :huh
 
ejthomp-

You have a GP1720C/NT.
The manual is available to download on our website.
 
Thank you very much! So it is a NavNet1, correct? It came with a 24" radar, RSB-0071 serial number R076-9683. What is the difference between the RSB-0071 that I have, and the RSB-0071-57 or 58 that I see for sale? What model of radar do I have? Furuno doesn't make model numbers easy to understand.... The Furuno decals on the outside of the dome have faded badly and have been removed. Can I order replacements?

I appreciate your help!!!!
 
ejthomp-

I apologize as you are correct, you have a NavNet 1 not a vx2. The model number would be a GP1700C/NT.

By adding the RSB0071-58 you would have a 1732C/NT system with 4kW radar. The RSB0071-57 is the 4kW dome for the 10.4" display only. If you have the signal cable for the radar it should have a rectangular plug on the end that connects to the 7" display. If you have a round plug it is the wrong cable. The domes are not interchangeable so don't just order the correct cable.

If you contact Furuno USA tomorrow they will be able to tell you which dome you have by serial number. Just ask for tech support or order services.

Once again I'm sorry for the wrong reply.
 
I have 1732C that is working very well, it is 7" display RDP 131. Will it connect with 10" remote display or any VGA remote display as 1833C ? Thank you
 
linhkienbodam":q95tqv1a said:
I have 1732C that is working very well, it is 7" display RDP 131. Will it connect with 10" remote display or any VGA remote display as 1833C ? Thank you

It will not connect via the REMOTE FMD DISPLAY port, but we would recommend connecting it up via the network port anyway. For that you will need a NavNet Ethernet Cable, 6P(F) - 6P(F) Cross Over Cable Part no. 000-154-050.

Hope this helps, :sail

- Maggy
 
It means that it can connect with Nav Net 10' display only via Network port on 7" and 10" display, right? Can not connect to any VGA monitor, right? I found the NavNet Ethernet cable, Pleae help me to check it if it correct. Thanks so much for your help
 

Attachments

  • z3330369911765_abcbfdcf58ce5ea3065bba7f44c917f2.jpg
    z3330369911765_abcbfdcf58ce5ea3065bba7f44c917f2.jpg
    201.7 KB · Views: 887
Sorry for the late reply, but that's it...

The network cable you have will go to the network port of the 1732c and to the network port of the 1833c.

Hope this helps, :sail

- Maggy
 

Attachments

  • 1732C.jpg
    1732C.jpg
    146.6 KB · Views: 757
  • 1833c.jpg
    1833c.jpg
    123.7 KB · Views: 756
Back
Top