TZT2 touch SD Ca.

[619fishing]

Hello everyone, I hope some one can help with my question.
What transducer do you recommend for my fishing,
I fish out of San Diego Ca, offshore tuna fishing, kelps, Coronado islands and the classic rock fishing up to 500 feet deep, thank you for any help.
My MFD is Furuno TZT2 Touch.

 

[Deep Blue]

619fishing,

What kind of transducer are you looking to utilize for your vessel. Thru-hole, Transom, Etc..?

- Deep Blue

 

[619fishing]

To my understanding Thru-hole are better, however, I am not opposed to use a Transom one.

 

[Deep Blue]

619fishing,

For use with your TZT2 and where you intend to fish around Southern California, I would recommend using one of these two transducers:

• 525TID-TMD 1 kW 50/200 kHz (14° x 23° / 3° x 5°-degree beam angles) Transom Mount Transducer with Temperature Sensor that comes with a 10 Meter Cable with 10-Pin Connector.
• 526TID-HDD 1kW 50/200 kHz (20° / 6°-degree beam angles) Bronze Thru-Hull Transducer with Temperature Sensor and fairing block that comes with a 10-Meter Cable with 10-Pin Connector.

-Deep Blue

 

[619fishing]

Thank you very much. I’ll look into them.

 

[Fishkilla]

619fishing,

For use with your TZT2 and where you intend to fish around Southern California, I would recommend using one of these two transducers:

• 525TID-TMD 1 kW 50/200 kHz (14° x 23° / 3° x 5°-degree beam angles) Transom Mount Transducer with Temperature Sensor that comes with a 10 Meter Cable with 10-Pin Connector.
• 526TID-HDD 1kW 50/200 kHz (20° / 6°-degree beam angles) Bronze Thru-Hull Transducer with Temperature Sensor and fairing block that comes with a 10-Meter Cable with 10-Pin Connector.

-Deep Blue

Hello everyone, I hope some one can help with my question.
What transducer do you recommend for my fishing,
I fish out of San Diego Ca, offshore tuna fishing, kelps, Coronado islands and the classic rock fishing up to 500 feet deep, thank you for any help

I have the same model, TZtouch 2 that has the internal sounder and I use a Airmar B-260 bronze thru hull. It gives awesome results in all water depths and will give you the resolution you need bottom discernment to work as well as tempeture. The Rezboost looks great as well. On your model of MFD there is a graphic display of sand, gravel or rock bottom that makes things easy to interpret. One thing though is this is a bronze thru hull for a displacement type vessel. max of 30 kts. Hope this helps.

 

[Fishkilla]

have the same model, TZtouch 2 that has the internal sounder and I use a Airmar B-260 bronze thru hull. It gives awesome results in all water depths and will give you the resolution you need bottom discernment to work as well as tempeture. The Rezboost looks great as well. On your model of MFD there is a graphic display of sand, gravel or rock bottom that makes things easy to interpret. One thing though is this is a bronze thru hull for a displacement type vessel. max of 30 kts. Hope this helps.

 

[Deep Blue]

Fishkilla,

The 526TID-HDD is the essential the same B260 transducer that AIRMAR manufactured for Furuno.

- Deep Blue