Scx-21 pc connection

[kadir53]

I have a scx-21 gps compass. I dont have gp39 but I want to connect it on pc by a usb to rs422/485 converter name is moxa uport 1130. I use to connect several times but I couldnt. so I take a warning windows that says ^^ failed to connect to the antenna unit^^ I try with connect td1-a, td1-b and rd1-c, rd1-h cables

 

[Sparky Wire]

FAP7002 711 connection question

I upgraded my plotter. Old one was only NMEA 0183, new one is only NMEA2K, so I am trying to get everything talking to eachother. I want to configure port one to send lat/long "GLL" and "ZDA" to my radio, which is the only remaining NMEA0183 device on board. The TB6/PORT1 NMEA0183 connections...

furunousaforum.com

Has the decoder ring for the terms. Once you have it properly interfaced to a PC, is should be verified with something like HyperTerminal to look at the sentences. You would check the port and baud rate are correct so the data is coming in clearly. I always recommend doing this before running any application that is looking for the data.