TZTXL BB with Axis Quad Server

[stiggy]

Trying to configure my BB to connect to an Axis Quad server and running into a road block. First thing is when adding a camera there is no selection to add a server, just an individual camera. Either way it's unable to find the camera. I've tried switching the BB wifi off to maybe force it to look at the connected switch.
IP Address for the server is the one found in the old TZT2 document.

Any ideas?

 

[Titanic II]

Did you try manually entering the Axis Server IP address? If you click "Add Axis Camera", if it times out looking for the camera it will display a screen that you can "add camera by IP". Try entering the IP and see if it displays video.

 

[stiggy]

Did you try manually entering the Axis Server IP address? If you click "Add Axis Camera", if it times out looking for the camera it will display a screen that you can "add camera by IP". Try entering the IP and see if it displays video.

Yup I tried that to no avail.

 

[Titanic II]

 

[stiggy]

Unfortunately, it doesn't auto discover and then when i tried to add it manually via the IP Address of 172.31.200.7 I get a "Error: Cannot connect to camera".

On a PC connected to the same switch if i type in that IP address the AXIS server comes up right away.

 

[stiggy]

I figured it out, dumb mistake. I'll share in case someone else is a dummy as well. Had the subnet mask as 255.255.255.0. That's what I get for doing it late at night.

Either way, thanks for the help!