TZT13x System Setup

[Buzzard11]

My setup
Port helm tzt13x with B175hw connected, lan to hub, nmea2000
Starboard helm tzt13x with b175l connected, lan to hub, nmea2000
Upper station tzt10X lan to hub, nmea2000
Furuno open array radar lan to hub
Furuno scx20 to nmea2000
Simrad ap44 to nmea2000
I am having trouble configuring transducers to units. Also want to make sure the whole system is setup correct for maximum benefits, scx20 is setup right and proving data to smooth out transducers. I need help on how to configure each unit and making this all work the way it should.

Furuno should create an AI system setting tool. You could enter in all your equipment and AI would step you through all system setting to make it work the best it can.

 

[TheReaper]

We normally recommend the default settings for the fish finders. If you want to tweak the settings, you can simply try different settings to see what works for you. The only transducer settings are to select the B175HW as the attached transducer on the display that has it connected (Furuno-Settings-Fish Finder-Fish Finder Initial Setup, choose model B175HW). Do the same on your other display to select the B175L for that one.