Reel Catch
New member
I have two TZT14's (both S/W Version 5.01) with a DRS6A Radar (S/W Version 1.16) that is networked into them. When a TZT is in radar split screen mode (radar/radar), I can set different ranges for the two radar displays. However, I cannot set different gains for the two radar displays. After I set the gain for one radar display, I go to set the gain for the other radar display, and then the gain on the first radar display automatically switches to be the same as the gain on the second radar display. This happens no matter which radar display I set the gain on first. According to the TZT Operators Manual Paragraph 6.23 on Page 6-18, I should be able to separately set the gain for the two radar displays. I have discussed this issue with two different Furuno Technicians and gotten conflicting answers. Any feedback would be greatly appreciated. Joe, Reel Catch
