TXT2 and GP1971F

619fishing

New member
Hello everyone I’m new to the Furuno family coming from Simrad, right now I have the tzt2 and gp1971f, if some one can help me with these units will be much appreciate it.
I only have one transducer airmarB175HW on the tzt any input or info on how is the best way to use these 2 units together, I have use them but I don’t see the advantage or I don’t know how to use them if anyone can help or guide me on how to use them.
I do have NMEA 2000 with, motor, fusion, fuel,
NAC-1 and point-1 antena/compass how ever I can see everything but the NAC-1
 
The TZT2 and GP1971F can share some basic digital information over NMEA 2000 but that is all. The TZT2 is a network MFD while the GP1971F is designed as more of a standalone unit.
The B175HW should be connected to the GP1971F, not the TZT2 unless you have a DFF1-UHD installed. TZT2 does not have a CHIRP fishfinder built in.
 
The TZT2 and GP1971F can share some basic digital information over NMEA 2000 but that is all. The TZT2 is a network MFD while the GP1971F is designed as more of a standalone unit.
The B175HW should be connected to the GP1971F, not the TZT2 unless you have a DFF1-UHD installed. TZT2 does not have a CHIRP fishfinder built in.
Thank you for your feedback. I did contact.Furuno and Simrad, what I got from the two of them basically I need Simrad MFD for the autopilot to work, and you are 100% correctfuruno will share some data not manage the autopilot
 
Back
Top