Tztxl and Flir interface
- Thread starter rockfshr
- Start date
It doesn't specifically state for TZT XL, but these are the instructions for connecting FLIR to a NAVnet. https://www.furunousa.com/-/media/s...ng_and_installation/flir_m400_setup_guide.pdf
Basically, you just have to set the FLIR camera to the static IP to 172.31.200.9. If you have a JCU, set that to 172.31.
200.100. This information is found in the document linked above. If you need assistance changing the IP in the FLIR, please contact their tech support.
Basically, you just have to set the FLIR camera to the static IP to 172.31.200.9. If you have a JCU, set that to 172.31.
200.100. This information is found in the document linked above. If you need assistance changing the IP in the FLIR, please contact their tech support.
Similar threads
