M
Mouse4x4
Guest
What all head units can be used with this dome. I have the dome and the wire and it was matched to a vx2 but I upgraded to a open array. I am just wanting to match it to maybe a smaller display. So what's my options
M
Melville
Guest
If it came off off a vx2 10.4" head then it is only compatible with another 10.4" vx2 or Navnet 1. It will not work with the 7" version of Navnet 1 or 2.
M
Mouse4x4
Guest
So the only thing this dome will work with is a 10.5 navnet vx1-vx2.
M
Melville
Guest
That is correct.
linhkienbodam
Furuno Super Fan
Can it used for my GD1900C ? I have a 10.4 inch radar (RSB-0071-057 and GP1900C but the dome seems too big for my boat so I buy an used RSB-0094-075 (serial number R129-4354)for replacement. I connected them and It seems 0094 dome can work with my display ( I set the antenna type to A) but the signal is very different with RSB0071. Please see the attached picture and explain.
Thank you
Thank you
Attachments
Yes the RSB0094-075 can be used with the 10.4" NavNet 1 or Vx2. In case of the photo, it looks like the initial setup items like MB suppression and Timing haven't been done properly. I would turn off the suppression and adjust the timing before putting in any desired suppression.
Similar threads
