I have a RDP149 networked plotter on Navnet2. It worked well until I moved the chart offset on source unit (which is the Radar and where the map card is fitted) to align with the radar image - there are significant chart/GPS errors in this area. I later removed the offset
The screen on the netwroked display now goes crazy when it is switched to plotter. It works perfectly on all other displays. I suspected a network /hub problem but switching hubs etc does not improve
The same network has a problem with AIS input to a navnet2 BB on same network. It is connected to data 2 and set for 38400 board and works well. But after a short time it tends to freeze all other data updates from other sources on other displays on the network. IS there an overload of data? The AIS is a Furuno FA150.
A picture of the plotter screen is attached
The screen on the netwroked display now goes crazy when it is switched to plotter. It works perfectly on all other displays. I suspected a network /hub problem but switching hubs etc does not improve
The same network has a problem with AIS input to a navnet2 BB on same network. It is connected to data 2 and set for 38400 board and works well. But after a short time it tends to freeze all other data updates from other sources on other displays on the network. IS there an overload of data? The AIS is a Furuno FA150.
A picture of the plotter screen is attached