Im running 2.07 on a NN3D, Charts are updated, dates and times on gps and tides are correct. The arrows for the current display are usually going in the opposite direction as the actual current and the speed of the current is wrong also. I did search but I came up with the common combination of both tides and currents being off. Just wondering if there are any suggestions or should I just turn off the current in the overly and forget about it.
NN3D displays wrong currents Arrows & speed
- Thread starter cstilphen
- Start date
I would start by running the most current software in the NN3D (v2.13). Next I would get the newest tides and currents file and load it into the machine.
https://www.furunousa.com/en/products/mm3-wwt-000
https://www.furunousa.com/en/products/mm3-wwt-000
sailor11767
Member
Dollars to donuts your time is wrong. And that is probably because your antenna has reached eol. Dig around in the display options and see what year your unit is seeing. I had to replace my antenna for that reason.
Similar threads
