HDMI INPUT "ENABLED" - 2nd monitor video options ?

[CBNW]

If we enable the "HDMI INPUT", can we still access the analog and IP streaming video sources on the 2nd display ?

The acknowledgment message says "the video will be disabled on your secondary display and vice-versa" - is this message stating "ALL video sources" are disabled on 2nd display or just the HDMI video source is disabled on 2nd display?

 

[FishTech]

What MFD and software version are you using? I'm not familiar with that message.

 

[CBNW]

TZT2BB

V9.56

If you go to the menu / cameras / HDMI - and enable HDMI (default = disabled). The message immediately appears.

This is also referenced in a couple of the Camera / Monitor tech docs on the TZT2BB support page

(accessing_secondary_display_on_a_single_monitor_tzt2bb)

()

 

[Johnny Electron]

Please refer to para 11-2 in the ops manual that shows a full table on what video can be shown at the same time on an MFD.

 

[CBNW]

Please refer to para 11-2 in the ops manual that shows a full table on what video can be shown at the same time on an MFD.

JE,

I found the following on 10-2 of Operator guide.

To clarify - when this guide says "images from a max of 2 cameras can be displayed simultaneously".

They specifically mean "1 camera image per monitor on 2 separate monitors (simultaneously) " - correct?