FCV295

[Anonymous]

I am having a problem receiving high freq. readings in the bottom zoom mode with BD.
The sounder is giving depth to a ROXANN GD system and needs this reading to give the hardness. We had to go into the Calibration bottom level settings to get the digital depth to show ( -70), which is required for Roxann to work. The TVG is set for +8 and 200 ft. We are getting good High readings with the settings but the bottom zoom is missing more than half of the readings. Are there other settings that might help?

 

[Snips]

Bert,
What depth of water are you working in, what transducer are you using, do you have TX power set to 10 and the TX Rate to 20?

Snips

 

[Anonymous]

THE TX POWER IS SET TO 10 AND TX RATE AT 20, WE ARE USING A B260-FUR AND THE DEPTH RANGES BETWEEN 12 TO 75 FT. I WAS NOT ABLE TO POST THE PICTURE OF THE DISPLAY, BUT I SENT THE PICTURE TO CLAYTON PADDISON AT FURUNO

 

[Snips]

Bert,
Clayton will be contacting you with a couple of ideas.

Snips