DRS2D Power/ Network problem

[nrgbentall]

Hi

I have a DRS2D (2015), connected to a 48v power supply (24v to 48v DC-DC converter), tested 48.0v at the connector inside the radar dome.
But the Ethernet does not come alive with no lights on the switch port, and does not negotiate a port speed.

Is this a fault with the DRS2D, or am I missing something, I did try a different ethernet cable connected directly into the radar dome but this made no difference

The switch is then connected to a computer running timezero.

Any help much appreciated

Nick

 

[Magnetron]

Likely the 2D hasn't been updated since 2015, IMHO. Update the software and let us know if you continue to get the same results...

https://furunousa.com/en/support/DRS2D#Software

Hope this helps, :sail

- Maggy