connect gp32 to VX2 RDP 148

[oltremare2003]

Good morning,
I would like to know if you can use a gp32 gps as a receiver for a VX2 Navnet system with a Furuno RDP 148. If possible I would like to know the wiring diagram so you can connect directly to the RDP 148.
Thank you.

Rino

 

[Johnny Electron]

The GP32 can provide GPS data for the RDP148. Normally you would use a 7 pin data cable (000-154-028) on data port one of the RDP148. The wiring would go like this...

GP32 -------------- RDP148
White (+ out) ----------Yellow (+ in)
Blue (- out) ----------- Green (- in)