Charts for 1934C

[cschultz11]

In my new to me 2006 boat I have Furuno Chartplotter and radar that seems to be working great other than I don't have charts for my area. The chartplotter is 10" unit and on the card slot on the lower right of the unit it says "NAVnet vx2 Navionics Gold SD" The radar is a 3.5' Open Array. The max range on the chartploter is 48NM so it looks like I have the 1934C model. I can't pull the unit out to get the serial number or model number off the back of the unit, but when I boot the unit up it shows a Program No. of 195002301.06.03

It looks like Navionics Gold cards are a thing of the past, but I see that CMAP is producing maps for the 1934C/NT model. My question can I run these CMAP Charts on my non NT model with a software upgrade on my unit? Thanks in advance!

 

[TheReaper]

Yes. If you convert your NAVnet vx2 display to C-Map compatible software, you can use C-Map Max chart chips. You will need special conversion software and a 2GB or smaller SD card to perform the conversion. If you wish to do this yourself, I can send you the appropriate software. If you wish to send it in to our Service Center, please use this link to receive an RMA number and instructions on how to send in your display: https://furunousa.com/en/myaccount/returned_merchandise_authorization

 

[cschultz11]

Yes, I'd like to perform the conversion myself. I do have a 2GB SD. Thanks for the quick response!

 

[TheReaper]

Sent you a DM with the info