Locrasto
New member
Good afternoon,
so I ran into a problem with my vx2 network, boat has a 7" display with a gp320b on data1 and the 10.4" gets its gps from network. also have a bbwx2 and FA50 they have their own antennas.
also have a gp39 on network, so if I tell the 10.4 to get gps info from data port 2 (gp 39) it works but if it pulls off network ais and plotter have a date and time problem, so my question is can I splice a new GP330b0183 in to the old gp320 cable, whoever did the original install zip tied the radar and gp320 together to pull from the helm to the hardtop, (2006 rampage 30 express)
if so what wires go to what colors or is it a direct match up to data port 1 on 7" , I have no problem getting a new one just dont want to spend $400 on it and not work.
thanks for your time
so I ran into a problem with my vx2 network, boat has a 7" display with a gp320b on data1 and the 10.4" gets its gps from network. also have a bbwx2 and FA50 they have their own antennas.
also have a gp39 on network, so if I tell the 10.4 to get gps info from data port 2 (gp 39) it works but if it pulls off network ais and plotter have a date and time problem, so my question is can I splice a new GP330b0183 in to the old gp320 cable, whoever did the original install zip tied the radar and gp320 together to pull from the helm to the hardtop, (2006 rampage 30 express)
if so what wires go to what colors or is it a direct match up to data port 1 on 7" , I have no problem getting a new one just dont want to spend $400 on it and not work.
thanks for your time