2×1871f connected by nmea 2000

[matxaku]

Hello
New here,thanks in advance
Recently installed in my boat 2 1871f ,one with p66 and the other one with tm185m
I connected both screens by nmea 2000
So I was thinking they will share the waypoints but nothing
Is there anything I need to change to this happen?
Also I check in both the nmea 2000 monitor and some sentence are blinking in orange ,it's normal?
Thanks

 

[matxaku]

 

[Kraken]

The GP1871F is designed as a stand alone plotter. You can connect up to 4 units to a NMEA200 backbone but they will not share information from one unit to the other. They can both access the same sensors on the NMEA2000 bus but they do not share routes, waypoints, etc....