TZT3 and TimeZero PPG

[buckshot]

What would it take to set up a TZT3 with the capabilities to create the PPG charts ? Will I need a monitor or will the TZT3 unit display the information? What modules and transducers will be needed?
I am mainly interested in a component list so I can look at a rough cost.
Thanks

 

[kicker]

At this time, we don't have much information on PBG on TZT3. I would talk to Nobeltec about what is needed for PBG on Timezero. I know a DFF3D and a 165T transducer is needed but not 100% sure what else is needed or verison of Timezero is requried.

Nobeltec
AMERICA (503) 579-1414
Monday-Friday 7:00am - 4:00pm PST
https://mytimezero.com/contact

 

[ericl]

You would need to run the TZT as a monitor, & run the nobeltec stuff on a Windows O/S computer. A sat compass for motion correction is highly recommended.
I was going to go this route but got turned-off by he attitude of the Nobeltec staff I dealt with. I bought an older Dell Alienware 17" laptop to do this for around $500 I put in a solid state disk. It has dual graphics cards & the graphics performance is on par with what the Nobeltec staff says works well (an Intel NUC - Next Unit of Computing). The screen on the laptop is higher resolution that the TZT3 but will not be as bright. Make sure the video output from the computer matches the video input of the TZT3 (HDMI@1920x1080).

 

[buckshot]

Thanks