TZT2BB Tracks not showing up

[thecfan]

Filled track memory but auto delete quit working. Finally deleted all tracks still not working.
using version 8.0 software with mcuoo1 and 2-mu150hd screens. help

 

[Johnny Electron]

If you swipe from the bottom is the Track Hide/Show Turned ON? Swiping from the right side to the middle is the Track Recording turned ON? Are the tracks setup for time or distance interval?

 

[thecfan]

Don't have swipe capability. using msu-001 keypad. Yes tracks are on tried both time 1 minute and distance .05 NM. its like the track buffer is full. Finally deleted all track points still no worky. same problem on tracks freezing on overnite trip.

 

[Johnny Electron]

Do you mean the MCU001 designed for the NN3D?

Also moving this thread because it was posted under Furuno News which is for moderators only. Please don't post under Furuno News.

 

[thecfan]

Johnny
I used the conversion kit that makes the key board work with the mcu001 guess i should have said 005? Yes it still doesn't work even though track is on. Maybe the gpa 017 gps antennae the culprit??
Not sure how the boat yard wired it.

 

[Johnny Electron]

If using the MCU005, there is a swipe button that should allow you to swipe the screen for settings.