TZT16F to Yamaha interface and NMEA2000 fluid sensors

[MercuryPanama]

Hi forum.

We have TZT16F MFDs, we have 3 fuel senders connected to 3 NMEA 2000 fluid sensors and they were working correctly. We installed a yamaha gateway, performed Engine and Tank auto setup and the engines info came up but we lost fuel levels as now it is trying to get this info from the engines.

I looked every where but I don't find a way to tell the system to pull engine info from the gateway but fuel info from the nmea2000 sensors, is this possible?

Thanks again for your help.

 

[Sparky Wire]

I would recommend using Mareton's N2K Analyzer to look at the data from both the engines and the fuel sensor. They are likely putting out the same PGN and are on the same device instance, stepping on each other.