TZT16F CHIRP transducer -AUTO CHIRP

[Capt. Jack Sparrow]

Hi,

We have SS175L and SS175HW CHIRP tdrs connected via Y-Cable to a TZT16F.

We have selected the correct tdr combination in the transducer set up menu and set PRESET 1 to AUTO CHIRP (on both HIGH and LOW)

When running the sounder, the setting in the bottom right of the screen shows 50/200 kHz. Should it not show AUTO CHIRP

 

[Sparky Wire]

That just happens to be the center freq of each CHIRP transducer you are running. That isn't indicating it is CW. It is sweeping but if you wish to go into manual CHIRP and adjust the frequency it will show lower/higher. It threw me the first time I saw it too, but it is exactly the way it is supposed to be.

 

[seaquin]

i only have a 175hw in my system at the moment but it ever shows 200hz, even when i select lower freq presets. would be awesome if it would shot the actual middle freq and the renge its sweeping