Transducer Matching Box with 10pin Connector to TM 260 1KW

[redsnapper]

Hi,
Can anyone please explain me how i can connect the TM 260 to the MB 1000 ,
i couldnt find the wiring diagram from MB1100 and TM260
Thank you

 

[Deep Blue]

redsnapper,

Here is a wiring diagram for connecting an AIRMAR TM260 Transducer to a MB1000 Matching Box. Is this the wiring diagram that you are looking for..?





- Deep Blue

 

[redsnapper]

Thank you for yor answering...ill try this ang give you a feedback.
Regards

 

[redsnapper]

Hi,

The diagram has not work.
My transducer iş m260 1 kw
Fisfinder 1871 f
Matching box is 1100
Must i change anything in the setting?
Thank you and regards
Leon

 

[redsnapper]

I dint find exactly the option under the menü from 1871 for tm 260 transducer!

 

[Johnny Electron]

The MB1000 and the MB1100 are the same with exception of the connector going to the sounder. (MB1000=8 pin MB1100=10 pin)
If the connection didn't work it would be recommended to have the transducer tested. The M260 is an in-hull and must be fully filled with fluid to work. Have you ensured that it is completely full?

 

[redsnapper]

The transducer is tm260...transom mount..the transducer works ...there iş not a problem...my mb1100 has 10 pins...the 3 output cables i thing goes to diferansiyel pins...in your diagram
1 to 3,4 to 2,5 to 3....
In my connector they goes to different pins...can this be the reason?

 

[redsnapper]

The output

 

[redsnapper]

I need the wiring diagram from 1100 ...

 

[Kraken]

Here is the wiring diagram for the MB1100. https://www.furunousa.com/-/media/s...on_dealers_only/mb1100_connection_diagram.pdf

 

[redsnapper]

I need the matching box and m260(old transducer) wit 2 low and high frequency wires wiring diagram
Thanks

 

[Dinosaur]

 

[redsnapper]

Thanks
But my transducer has 2 blacks wire,
I dont see a black white wire.
At your sheme are 3 connection 50 khz
And 1 connection 200 khz.
Is they a mistake in the shema?
I have chanke severler times the wires snd dont want cutting the wires again and make experimemts.
Could you look at the diagram please again?
Regards