Screen capture

[toocruisy73]

When screen capture is enabled and a snap shot is saved with the waypoint/event, is there a way to export the screen captured images?

 

[kicker]

Hello,

An SD card has to be in the left or right slot for it to save a screen capture for it to export. It will not save to an internal hard drive of the unit. Please read below from TZT1 OPS manual.

 

[toocruisy73]

Im running 2 x TZT14, one as the sounder and one as mapping. To clarify my above hat Im asking is if I have the screen capture enabled on both units(right SD) when I mark on the sounder TZT14 unit the mark/waypoint will appear on the mapping TZT14, however the screen capture is not shared across to the Mapping TZT14.

Is it possible to share the screen capture across both units. The mapping TZT14 is set up as the master and the sounder TZT14 is set up and the slave.

Thanks in advance.