RD-30 Screen is shot. What do I replace it with?

[Fever Reliever]

RD-30 Screen is shot. What do I replace it with? They are both flush mounted and do not want to reconfigure my dash? What are my options other than finding a couple old rd-30's to drop in there? Is it worth having the screens fixed by furuno? Would they do that for these older units?

Thanks
Capt Miles

 

[C-Bass]

Good afternoon Capt. Miles,

thank you for your inquiry.

There is a chance that we might be able to fix the RD30's.

Can you provide a photo of what the displays look like when powered on?

We do have a replacement for the RD30, its called an RD33. However the dimensions are a bit different. We do make an adapter plate that will fill the extra space concerning the width, the RD30 is wider than the RD33. However, the RD33 has a taller dimensional height than the RD30.

What do you have the RD30's connected to?

C-Bass

 

[Fever Reliever]

One screen shows nothing and the other is on its way out with a burn spot in the middle of both. Ill take some pictures

 

[stevemitchell]

I have two RD-30's that I would like to replace. What is the part number for the adapter plate for the RD-33 to fit in the same space?

 

[Melville]

Part #001-156-750 $35 list.

 

[stevemitchell]

Thank you!

 

[duffy]

I also have problems with RD30 style screen burning in the middle. I have replaced these with RD33 where possible, but I still have RD30 style screens for our AIS150 and SC-50 as well as remote RD30s that are flush mounted in a console, and not easy to replace .
I have electronicss people who can change the screens over but can anyone tell me where I can buy compatible screens
Maybe it global warming! Despite always using suncovers I have in the last 12 months had this screen burn on two boats in two locations - varying from Navpilot 500 to Navnet 1722, and even a simple LS6100.
There is nothing ever left in direct sunlight and the ambient temperate in wheelhouse at maximum would be 35C.
Can I still get replacement parts from Furuno, or can anyone help with an OEM source?

 

[Johnny Electron]

Furuno only offered limited replacement parts on this unit because the LCD cost was as much as a new unit. The LCD is NLA.