Radar
- Thread starter Frogman
- Start date
Thanks for the reply help!
I guess the question should have been I have a RDP-149 navnet v 2 could I run a 6 or larger kw open array
As long as they are one of the two that are designed to work with those older NavNets. For example the 1953C/NT (RDP139) or 1954C/NT (RDP149) is a 12 KW that came with a PSU005 power unit that ensures that the suitable 12KW scanner has everything it needs to operate. The entire cable set, power supply, gearbox, and antenna array would be needed. Changing the radar would be just like you originally purchased the 1954C/NT instead of the 1824C/NT.
Last edited:
I found a 4’ open array but the tag is faded out anyway to identify it from inside?
Well that is an RTR 059 so yes, that is a 6KW radar. I could be used directly to an RDP139 (1943C/NT) or RDP149 (1944C/NT) with the correct radar cable. It would be either an RSB0070 (most common) gearbox or a RSB0073 (less common 48rpm version. Full part number is more than likely the RSB0070-059.
No. The correct raw cable would be RW6537, but that's not the connectors or anything. If you want the whole cable with connectors and everything, we still have them in stock. Here are the part numbers that you can order from any Furuno USA dealer:
10 meter P/N: 001-409-560-00
15 meter P/N: 001-409-580-00
20 meter P/N: 000-409-590-00
30 meter P/N: 000-409-610-00
10 meter P/N: 001-409-560-00
15 meter P/N: 001-409-580-00
20 meter P/N: 000-409-590-00
30 meter P/N: 000-409-610-00
12kW. If RSB0072-060 and used on NN2 display (RDP149) it would be a 1954C(/NT). For that connection would need PSU005 power supply too.
Similar threads
