Planning on adding another transducer

[Dmc57]

I currently have a TZT12f, I have a side scan transducer run directly to that. I also have a B744v that is run thru a BBDS1. I’m mostly fishing in 100’-200’ of water in the gulf. Primarily bottom fishing.

I’m planning on adding a M265LH transducer, for now I’ll disconnect and run this to the TZT. Will I be able to use the accu fish and bottom discrimination like I do now with the B744v and also use the high chirp on the m265lh on a split screen?

I don’t use the side scan, probably should work on that, but may add another screen or box later to be able to.

 

[Johnny Electron]

Regardless if you remove side-scan and add the B265LH, it will not allow bottom discrimination. For the 12F and newer sounders like the UHD+ only selected C/W transducers offer the BD function. You of course have that ability via the BBDS1 with the B774V.

 

[Dmc57]

My question is can I run BD with the BBSD1 and at the same time run the B265lh and see them on the Chartplotter split screen.