nav300 gateway authentication failed

[Yan]

Hello, I have a tzt3 with last update, scx 20 and nav300. Octopus reverse pump 12v. Single Mercury 300 dts

All modes are working beside sabiki lock. I get gateway authentication failed error. Also I am unsure which rudder sensor should I select. I can see my MFD, scx20 in the device list. Fuse at control box is ok. Pgn output on tzt are all on.

 

[TheReaper]

Regular Sabiki mode can be used with any engines. Sabiki Lock, Point Lock and Speed Control functions require specific Suzuki outboard engines for FishHunter Drive. As a side note, all PGN outputs on TZT3 should not be on. With your setup, all that should be on is 127283, 127284, 127285 which are cross track error, Nav data, and Nav route waypoint info.

 

[Yan]

Thanks. There is no information in the manual, at least from what i read, about its only for suzuki

 

[TheReaper]

It's sometimes not obvious where some specific information can be found in a manual. Here's a screenshot from the Operator's Manual that I came across...

 

[Yan]

I saw it now, hidden in the menu overview....

Thanks