M265 bare wire to TZT316F

[h_useynu]

I have an Airmar M265LH Transducer with bare wires. I am trying to cut the 10 pin end of the 10pin to 12 pin adapter that came with my Furuno TZT3 16F MFD.
Can anybody provide me with a diagram to match the adapter cables to transducer cables as I am not familiar with it.

 

[Johnny Electron]

You can't do it. The 10 to 12 pin adaptor only has connection to CH0 and you need to wire to both CH0 and CH1. You will need to purchase a 12 pin pigtail cable to wire the M265LH into.

TZ3-12P-PGT

www.furunousa.com

 

[h_useynu]

You can't do it. The 10 to 12 pin adaptor only has connection to CH0 and you need to wire to both CH0 and CH1. You will need to purchase a 12 pin pigtail cable to wire the M265LH into.

TZ3-12P-PGT

www.furunousa.com

I have got the tz3-12p-pg

Can you provide me with color coded diagram to make the connection.


Thanks

 

[Kraken]

I have got the tz3-12p-pg

Can you provide me with color coded diagram to make the connection.


Thanks

https://www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/12pin_xdr_pigtail_pin_out.pdf