I just installed the DFF 1 Plus into my system. I previously had the B175HW connected with bare wires to the DFF 1. I cut the end off the blue plug adapter and soldered the wires blue-blue, black-black, orange-orange, brown-brown, white-white. It then tied the transducer bare to the bare that is paired with the blue black.
I fired up the xl 24 and chose the "model" and "B175 HW" in the menu. I activated the transmit selection while on the trailer. It started bouncing around ranges but not emitting any audible click. The temperature also is not working.
Does anyone have any advice?
I fired up the xl 24 and chose the "model" and "B175 HW" in the menu. I activated the transmit selection while on the trailer. It started bouncing around ranges but not emitting any audible click. The temperature also is not working.
Does anyone have any advice?
