Furuno 1100 transducer plug connection

tyke123

New member
Hey guys,
Couldn’t find a previous post in this, apologies if it’s been answered before.
I’m trying to find what PIN numbers on the 4 pin Hf/LF plug to solder my transducer wires to.
I’m running a 38bl 9hr 2kw for low and a 200b 8b HF for high.
Any advice would be much appreciated.
Cheers guys
 
tyke123,

The part number that you are looking for is: 000-160-159 4-pin Transducer Connector Plug. You can order this part through your local Furuno Dealer.

Also keep in mind that transducers of 54 – 64 kHz, 112 – 122 kHz and 171 – 181 kHz cannot be
connected to the FCV-1100L because of noise. The FCV1100's available range for HIGH Frequency; 40 – 220 kHz, and for LOW Frequency; 25 –220 kHz.

I hope this information helps..? ;)

-Deep Blue
 
Thanks DeepBlue
I have the plugs, I’m just trying to work out which ports on the rear of each plug I need to solder the wires to

Cheers
 
Back
Top