FCV585 connected to Onwa KP1299-A

[Mim]

Hi all. Hoping someone can help me. I have an FCV585 and have recently installed an Onwa KP1299-A chartplotter with built in AIS. The specs for the Onwa say it receives TLL nmea sentences. My hope is that I can connect the 2 units together to a. Have Onwa feed GPS data to Furuno and then have Furuno feed water temp / depth and, when I press the Mark button on the Furuno, that a waypoint will show up on the Onwa. But here is my dilemma and question. The Furuno is obviously rs422 nmea0183 with TX- & TX+, and RX- & RX+ whereas the Onwa is rs232 with TX+ and RX+ and GND. Can someone advise me how to wire these up? Do I have to get converters? I’ve read you can wire them without converters if ‘you know what you are doing’!
Appreciate any help / advise people are able to provide.

 

[Titanic II]

Yes, one NMEA2000 to NMEA0183 converter is required. The Furuno model is the IF-NMEA2K2. it has both NMEA0183 In and Out connections.

Here is the link for more information: https://furunousa.com/en/products/if-nmea2k2

 

[Mim]

Yes, one NMEA2000 to NMEA0183 converter is required. The Furuno model is the IF-NMEA2K2. it has both NMEA0183 In and Out connections.

Here is the link for more information: https://furunousa.com/en/products/if-nmea2k2

Thanks for the suggestion but I’m not sure you have understood my question. Both units are nmea0183. One (the Onwa) is older style rs232 and the Furuno is new rs422. I’m not sure why I need a nmea2000 to nmea0183 converter? Am I missing something with your suggestion? Thanks.

 

[Titanic II]

Disregard, most are NMEA2000 to NMEA0183 questions these days. That being said you'll need a RS422 to RS232 converter. Do a google search. there are plenty out there.