asaltweapon
New member
I have a fcv 295 that just quit working black screen it's getting power all fuses are good.i need to know who do I send it to get fixed at furnno.
Fcv 295
- Thread starter asaltweapon
- Start date
If your FCV295 was purchased from Furuno USA, then do the following:
1. Put a note INSIDE the box with your FCV295 containing your name, address, phone number, email (optional) and description of the problem.
2. Send to:
Furuno Service
4400 NW Pacific Rim Blvd
Camas, WA 98607
If your FCV295 was purchased from a distributor other than Furuno USA, please contact them to arrange for repair. Here's a link to the international distributors: https://www.furuno.com/en/support/distributors/
1. Put a note INSIDE the box with your FCV295 containing your name, address, phone number, email (optional) and description of the problem.
2. Send to:
Furuno Service
4400 NW Pacific Rim Blvd
Camas, WA 98607
If your FCV295 was purchased from a distributor other than Furuno USA, please contact them to arrange for repair. Here's a link to the international distributors: https://www.furuno.com/en/support/distributors/
asaltweapon
New member
My furno came with the boat when I purchased it used can I still send it to furno
Sure. Furuno will evaluate the unit for repair as long as it has a serial number. Any unit without a serial number would need to be repaired elsewhere. We don't work on units where the serial number has been removed.
asaltweapon
New member
Awesome thanks
Similar threads
