Hi again,
after the boat transport from PHUKET to TURKEY I had now time to further investigations:
A few days before we left PHUKET we gave the FAX30 device to a FURUNO dealer in PHUKET to do the software update. After two days he came back with the FAX30, we put it into the system at STORMVOGEL and nothing worked. So we did a master reset of FAX30 again - than the PC access worked again, but still not the MFD12 access.
The program numbers in the TEST page still said the same:
--------------- SNIP / SNAP ------------
0850188-01
0850189-05
--------------- SNIP / SNAP ------------
So the software update done by the PHUKET FURUNO guy seems to be failed. As we left PHUKET this is history...
...so I tried to get the real software version out of the FAX30. As mentioned, I powerd the system off, put dip switch #2 to on and put power to the system.
Result: No difference to normal operation. When I access the FAX30 by PC web browser I see the normal web gui of the FAX30. Also no difference to #3 or #4.
So do I need to call another CGI in the URL to get the version?
As I do not like to dismount the device again here in TURKEY and put it to a TURKEY FURUNO guy, pay again for it with the same negative result than in PHUKET I really like to know how I can do the recommended software update of FAX30 by myself.
Or, as alternative, how I can configure the MFD12 in that way, that it ignores the FAX30 so I can access the FAX30 by PC any time, even if MFD12 is on.
As a reminder:
When MFD12 is off, I can access FAX30 by PC, if MFD12 is on, I can not.
Thanks in advance for any suggestions / hints,
Peter.