Tpalmerjr3
New member
Having a Camas 28 HB built and working on the electronics package. I've run Furuno on my last 2 boats, the latest the TZTouch2 12" and want to do the same with this one but the TZTouch3 12". The problem is I would really like to run the DFF3D this time and looking for some assistance with transducer selection. I will have a B60 thru hull 50/200 wired direct to the MFD as well and is mounted just forward of the first step. The boat has a Michael Peter's SVVT (stepped Vee Ventilated Tunnel) hull which throws a rather large wrench in the equation. The main questions:
1. The Transom Mount very clearly says not for stepped hulls, presumably for aeration problems. If used, would I at least be able to get to a modest trolling speed, 6-8 mph, and keep picture.
2. Would a thru hull (preferred) be too much impact on performance/handling if I could even find a suitable location. Also, boat will be trailer store.
3. Any other ideas would be appreciated.
Hull design below
1. The Transom Mount very clearly says not for stepped hulls, presumably for aeration problems. If used, would I at least be able to get to a modest trolling speed, 6-8 mph, and keep picture.
2. Would a thru hull (preferred) be too much impact on performance/handling if I could even find a suitable location. Also, boat will be trailer store.
3. Any other ideas would be appreciated.
Hull design below