Dff1-uhd transducer power

[davidparker]

Hi ,
I have a TZT 14 connected with a Dff1-uhd sounder and a Dff3d sonar, when I power off the TZT unit it turns off the DFF3D sonar but the Dff1-uhd transducer keeps transmitting. To stop this i have to go into the menu and turn off the transmit button. Is there a software update that addresses this issue or do I need to put a seperate switch on the dash to turn off the dff1-uhd.

 

[Johnny Electron]

The unit is programmed to stop transmission and go to STBY around 8 mins after it sees no network device to speak with. The problem is it sees the radar on the bus (if you have one) which is in STBY, so the DFF1-UHD stays active. If you have a radar and don't want to manually stop your sounder transmissions, you will have to add a switch.

 

[davidparker]

Thanks for your quick reply. I do have a radar so will add a switch as suggested.

cheers