CANBUS Power TZT14

A

Anonymous

Guest
I the power from the TZT14 to the CANBUS Backbone, without the connection of the multi cable that says it will feed power to the canbus circuit. If I have power on the canbus circuit from a second location will it work connecting it to the TZT14.
 
Yes. 12Vdc power can only come from one location on a NMEA2000/CANbus network. If you have 12Vdc power already on your network, then you would not connect the 18-pin cable to the TZT14 to power its port.
 
Back
Top