#1942 MK-2 Reversed Image

[Anonymous]

I upgraded from a #1932 to a 1942 Mk-2 as the connections are the same. For some reason the radar image is reversed on the screen. That is, what should appear on the right shows up on the left. Can someone tell me how this is possible and how to correct it? This was a plug and play situation and should work fine. Does it have something to do with Course up vs North up modes etc?
Thanks in advance,
Richard

 

[Johnny Electron]

You must change the radar model number/type in the display to the 1942MK2 under the factory settings. Sounds like you have the display setup to 1932 still.

 

[Anonymous]

Ok sounds simple. Are factory settings in Menu?

 

[Johnny Electron]

Normally hold GAIN knob in as you power up unit; then factory settings normally show up.

 

[Anonymous]

Johnny, When I pushed in the Gain knob and started the unit up, it started as normanl. The array also started as normal.

 

[Johnny Electron]

If you are holding the knob (until unit comes up) and it isn't working then it isn't a 1932 or the display has a problem.

 

[Anonymous]

JOHNNY, I got a hold of Fururno and they explained how to get into the service menu's and fix the issue. I had to change the aray set up in the 1942MK2 unit to a 1932 array. Thanks fo helping, Richard