1815 with IF-NMEA2K2

[GB119]

Hello.. looking at the wiring schematic for this radar, it looks like it will receive heading on nmea port 1.... will it accept both heading and position on nmea port 1 if using the adapter in the topic subject of this post... and will it be good for TT?
Next question.. will this radar put out the TTM string for use with a plotter assuming it is connected as above? That is port 1 is transmit/receive with IF-NMEA2K2 wired correctly to port 1. Plotter is in nmea2000 network and can recover the converted pgn (TTM)
Thanks..

 

[Taniwani]

You shouldn't have a problem receiving both, the heading and Pos all on port 1. And the IFNEMA2K2 will pass it.
But I think with respect to TTM you are out of luck. I have not found a N183 to N2K gateway converting TTM to PGN128520.
The IF-NEMA2K2 claims to do it in the other direction and I wonder what for, as my TZT2 and NXT radar are not sending out PGN128520, but do send TTM on N0183.

 

[Johnny Electron]

What model plotter are you using?

 

[GB119]

Lowrance HDS series

 

[Johnny Electron]

I agree with Taniwani, it doesn't look like it would work.

 

[GB119]

Thanks