1623 display replacement

S

soverel48

Guest
My 1623 radar has no more than 10 hours of usage, most all of that in standby mode. The Power cable and fuse are good, bt, the display will not turn on. Any ideas on the source of the problem? Is a replacement display available?
 
soverel48,
thank you for your inquiry.
Products sold by Furuno USA Inc through their authorized dealers come with a limited two (2) year warranty. as such you may either return the unit to our Camas WA repair facility for evaluation/testing by our repair department or contact any one of our authorized dealers to arrange service. https://www.furunousa.com/en/company/find_a_dealer

If you are sure that the unit has a clean supply of 12v or 24vdc and the fuse is not blown I might suggest unplugging the scanner/antenna cable, and then trying to power up the display again. Does the display power up when there are no other connections? (aside from the power cord).

yes; there is a replacement display available. the P/N is 1623DISP. MSRP of $825usd.
 
Back
Top