A
Anonymous
Guest
My system is Navnet VX2 GP1920 RDP 149 with DATA1 – BB GPS, DATA2 – NMEA data out to a 1942 radar, DATA3 – NMEA from a PG1000 compass, NETWORK to Ethernet Switch ; a Navnet VX2 1720 RDP148 NETWORK port connected to Ethernet Switch; and a DFF1 Depth Module connected to an Ethernet Switch.
I would like to input NMEA2000 AIS information from an ICOM 506. I understand from prior posts that this can done using Cable 000-154-028 NMEA Cable, 1 x 7 Pin Connector to DATA 1 of the 1720 and an IF-NMEA2K2 Data Convertor to the NMEA2000 network. Do I understand that correctly?
DATA 4 on the 1920 is currently unused and is also a 7 Pin. Could the Cable 000-154-028 NMEA Cable be connected to this port to receive the AIS data?
I would like to input NMEA2000 AIS information from an ICOM 506. I understand from prior posts that this can done using Cable 000-154-028 NMEA Cable, 1 x 7 Pin Connector to DATA 1 of the 1720 and an IF-NMEA2K2 Data Convertor to the NMEA2000 network. Do I understand that correctly?
DATA 4 on the 1920 is currently unused and is also a 7 Pin. Could the Cable 000-154-028 NMEA Cable be connected to this port to receive the AIS data?