New boat to me with an old NavNet 3D system with an NMEA2000 network. There’s a wind instrument at the top of the mast and I just found its NMEA2000 cable, which is not connected to the network. Which is why I obviously don’t have any wind data on my displays. When I plug it into an open port on the NMEA2000 backbone, funny things happen: the B&G Triton displays lose all their data (depth, positioning, heading , etc.) and the MFDs stop working. If I try to reboot the MFDs, they won’t fully restart and just stay on their opening boot screen. Any clues?