What else is needed?

[Raspey]

I am trying to put together a 2nd hand system for my old man. I got them as a cheap package from an upgrade. I want to utilize as much as I can for him. I have the following parts so far.

2x RCU-017 Control Units
2x RPU-015 Processor Units
1x RSB-0072 Antenna Unit
1× RSB-0070 Antenna Unit
1x DFF1 Network Sounder
1x MB-1100 Matching Box
1x GP-320B GPS Receiver
Some Cables

What Dispay or Displays would go best with these items?
What else do I need to complete the system using these items?
Cheers

 

[Johnny Electron]

Pretty much any display that fits your dash and accepts standard 15 pin VGA video will work. You still need a transducer and network hub (with all assorted cables). You will need a radar power supply for the RSB-0072. I can't tell you which one without knowing the RTR number of it. It will be either the PSU005 or PSU008 depending on what is inside that gearbox. You might also pick up at least one C-map Max SD chart map for your area.

 

[Raspey]

72 RTR is 0061
70 RTR is 0059
Thankyou

 

[Raspey]

Those are the two RTR numbers on the radar above. I just realised I have a PSU-008.
Can I set up a simple version using what I have above?

 

[Raspey]

Can I add this to the system?

FURUNO NavNet 3D 12.1" Multi Function Display

 

[Johnny Electron]

The RSB0072-061 would be Model # "1964C/NT" when connected to a C-map RDP149 display. It requires the PSU008.

The RSB0070-059 wold be a model# "1944C/NT" when connected to a C-map RDP149 display. It will not have a PSU.

You can find manuals on each system by looking up the model numbers on our website. Wiring will be shown on page S-1 of the installation manuals.

Yes, these radars can work with the Vx2 system.

 

[Melville]

These radars are not compatible with Navnet 3D systems.

 

[Johnny Electron]

Agreed, you can NOT use them with the NN3D system or any newer NavNet system. The Vx2 was the newest you can use.