TZT3 12 and Yamaha F300s

[Grady306]

Have a new Grady White with twin 300s Yamahas and helm master/joystick. Trying to get the Yamaha to interact with the Furuno, but have not. Is there anything that is needed in addition to make these communicate with each other? I see the instrument display, but it is not working. Thanks!

 

[Kraken]

You do need a Yamaha engine gateway to get the information to the TZT on NMEA2000. You would setup the data in the Yamaha Engine Setup. HOME - SETTINGE - INITIAL SETUP - YAHAMA ENGINE SETUP. Here is page 13-26 from the TZT3 operators manual.

 

[Grady306]

Is this the correct gateway?

https://www.boats.net/product/yamaha/MAR-GTWAY-KT-10?gclid=Cj0KCQjwpcOTBhCZARIsAEAYLuW9GVY_iHg_0ao5DNt5EcJ8lYJ36VQvySe23Q1SgEMN0WqcSmgpA4YaAiNoEALw_wcB

do I need one or 2 for twin engines?

 

[Kraken]

Is this the correct gateway?

https://www.boats.net/product/yamaha/MAR-GTWAY-KT-10?gclid=Cj0KCQjwpcOTBhCZARIsAEAYLuW9GVY_iHg_0ao5DNt5EcJ8lYJ36VQvySe23Q1SgEMN0WqcSmgpA4YaAiNoEALw_wcB

do I need one or 2 for twin engines?

I would verify with Yamaha that that is the correct gateway for your engines. Attached you will see that you will need the Yamaha Engine Hub to connect multiple engines.