Tzt2bb, tztbb route sharing

[underwaterdude]

Hello! I'm having trouble getting the tzt2bb to share any routes etc from/to tztbb, and trident. All of the network, n2k devices show up in the menu, and are working other than the sharing functions. Also... tzt2bb does not see starlink over wifi, even though it does find phone hotspot, tztbb uses starlink just fine.
All software is current. Except trident.

 

[Johnny Electron]

If you are mixing the TZT and TZT2 series, they both must be on v6 software. Odds are the TZT2 is not at v6 but something higher. The newest possible would be TZT running 6.03 and TZT2 running 6.21

 

[underwaterdude]

I of course just updated the tzt2 to the latest software...
Thanks!

 

[underwaterdude]

Is there the possibility of rolling the software back to 6.21, 6.23, or 6.26 from 9.7? If so are those versions somewhat stable on the tzt2bb? And last but not least is the older software still available for download somewhere?
Cheers!

 

[Sparky Wire]

Only older model TZT2BBs s/n 1000-7410-2489 and older can be downgraded to v6 software. You can get with your local Furuno official support to obtain older software that might be needed, if you have an older TZT2BB. Any newer model TZT2BB units can not be mixed with TZT series one because the newer main boards changed over the production life. The newer serial numbers must run v8.02 or higher. The older software will NOT work in the newer serial numbers. This is why the software is not posted for those who might mistakenly try to use it for a newer production unit.