TZT2BB - Reboot issue

[CBNW]

New TZT2BB installed 6 months ago @ sw v9.5.

The CPU#1/HDMI #1 is experiencing a 'reboot issue" - Unit reboots itself several times a day.

(The CPU#2/HDMI #2 is stable; no issues).

There are 3 TZT3 12" inches on the network (TZT12F). (We are in the process of verifying software levels - standby).

Is this symptom a known issue?

Please advise.

 

[Johnny Electron]

Not a known issue. Many thing can cause reboots from bad chart cards, bad NMEA 2000 networks, system noise, grounding loops etc. This will very focused around the boat and the installation. It would be best you contact official tech support of the local Furuno distributor with a system drawing and all the details to start working your case. Matching software is also very important.