Tzt2 with fa 30 AIS reciever disables vector charts.

[Diesel]

When FA30 AIS reciever is on my TZT2 only allows raster charts. I would prefer to use the vector charts with the AIS. How can I make the TZT2 display vector charts with the AIS targets?

Thanks

Diesel

 

[Melville]

Diesel-
Are you saying that you have AIS targets on the raster charts but they just disappear when you switch to the HO charts? Do you have pay for charts unlocked?

 

[Diesel]

All of the vector charts work fine if the tzt2 is turned on with the power to the fa30 off.
If I then turn on the fa30 the vector charts still display fine but no AIS targets show ( yes they are enabled). If I shut down and restart the tzt2 with the fa30 powered up the tzt2 opens with a raster chart and AIS targets do show but vector charts are not available. The only chart choices in the swipe up from the bottom menu are auto and the raster option . I am on the latest version of the operating software. 5.xx.

Thanks

Diesel

 

[Melville]

Diesel-
PM being sent.

 

[Diesel]

PM did if not come through yet.

Thanks

 

[Melville]

Let me try it again.
If it doesn't come through please contact our tech support group at 360-834-9300.
They will provide you with instructions to resolve your issue.