TZT14 Powering on issue

[jollyradar]

Setup is 2 TZT14’s and 1 TZT9.

On one of the TZT14’s, the master, the power button will not turn the unit on. The unit will power on whenever I switch AC power to the vessel. E.g shore power to gen.

Once the unit is on, the power button works to turn the device or the network off.

2 questions, does this device have a “wake on LAN” that’s triggering it to power up with the AC power cycle? Is there a repair or update for a power switch when the switch works for every function besides powering on?

Thank you

 

[Titanic II]

It doesn't have a "wake-on-LAN" but, it does have remote power switch input. With this you can wire an external momentary-contact ON switch to power the unit up and down. Please see the attached document.

 

[jollyradar]

It doesn't have a "wake-on-LAN" but, it does have remote power switch input. With this you can wire an external momentary-contact ON switch to power the unit up and down. Please see the attached document.

Ok, the screen is turning on with something that is AC powered triggering it to turn on whenever the AC power is cycled.

So I’m trying to figure out what that could be.